MpySupport
Mpy Moderating
EasyJTAG Turbo Adapter
Built by Engineers Who Have Been Repairing Phones Since Before Smartphones Existed
EasyJTAG Turbo is a professional eMMC and UFS service platform developed by the EasyJTAG and Z3X Team, backed by more than 25 years of GSM engineering experience. Designed for repair centers, data recovery laboratories, forensic specialists, and manufacturing environments, EasyJTAG Turbo combines proven reliability with modern high-speed storage support.
Hardware Features
Main Architecture
Dual-Processor Design
ATSAM3X8E ARM Cortex-M3
Main controller
USB command processing
Power management
Voltage monitoring
Security management
Firmware update handling
Synopsys UFS/MMC High-Speed Storage Processor
USB 3.1 to UFS bridge
MIPI M-PHY HS-Gear3
USB 3.1 to eMMC bridge
DDR HS200 support
USB 3.1 to SD bridge
SDSC, SDHC, SDXC, and SDUC support
UHS-I transfer rates up to 100 MB/s
UASP, BOT, and custom protocol support
High-speed data transfers
Supported Memory Technologies
eMMC
1-bit, 4-bit, and 8-bit bus support
eMMC 4.5 and newer
HS200 mode
eMMC ISP operations
Universal EasyJTAG P20 socket interface
eMMC cloning
Boot partition access
RPMB access
Firmware FFU operations
UFS
UFS 2.1 to UFS 4.1
MIPI M-PHY HS-Gear3
UFS ISP operations
Licensed EasyJTAG P20 socket interface
ECC508 hardware authentication
Descriptor access
Geometry access
RPMB support
USB Interface
USB 3.1 SuperSpeed
5 Gbps link speed
UASP support
USB Mass Storage support
Full USB 2.0 backward compatibility
Power System
Adjustable Target Power
Supported rails:
VCC
VCCQ
VOUT
VSYS
1.1V
1.8V
3.3V
Capabilities:
Programmable target voltages
Controlled power sequencing
Safe power cycling
Voltage validation before access
Measurement & Protection
Voltage Monitoring
Hardware ADC feedback available for:
VCC1
VCC2
VOUT
VSYS
1V1
1V8
3V3
Capabilities:
Target voltage detection
Power-good verification
Undervoltage detection
Voltage telemetry
Current telemetry
Protection
USB ESD protection
eMMC/UFS signal line protection
Filtered power rails
Isolated clock translation
Security
ATECC508A Secure Element
Z3X eSIM v1.0 Support + Dual Box Linkage
Capabilities:
Hardware authentication
Cryptographic key storage
Secure licensing
Challenge-response verification
Clone protection
Secure device pairing
Professional Service Features
eMMC ISP repair
UFS ISP repair
Boot repair
Firmware flashing
Full memory imaging
Partition access
RPMB operations
Device identification
Factory mode operations
Test-point servicing
Dead-device recovery
Secure licensing
Advanced Android service functions
Professional data recovery workflows
Advanced File System Support
EasyJTAG Turbo integrates a high-performance block device layer with modern filesystem support for eMMC, UFS, SD, SSD, and image files.
Fully Supported
Filesystem Access
EXT2 / EXT3 / EXT4 Read / Write
FAT12 / FAT16 / FAT32 / VFAT Read / Write
XFS Read / Write
BTRFS Read / Write
F2FS Read / Write
EROFS Read Only
Under Development
Filesystem Access
exFAT Read / Write
NTFS3 Full Read / Write
Legacy NTFS Read + Limited Write
APFS Read Only
HPFS Read / Write
QNX4 Read + Limited Write
QNX6 Read Only
Supported filesystems are block-device based and optimized for modern storage technologies including eMMC, UFS, SD, SSD, and forensic disk images.
Designed by Repair Engineers. For Repair Engineers.
For more than a decade, EasyJTAG products have been trusted by thousands of repair shops, forensic specialists, data recovery laboratories, and service centers worldwide.
EasyJTAG Turbo is not just another programmer. It is the result of decades of practical experience, countless repaired devices, and a simple philosophy:
Make difficult jobs easier. Make impossible jobs possible.
Built by Engineers Who Have Been Repairing Phones Since Before Smartphones Existed
EasyJTAG Turbo is a professional eMMC and UFS service platform developed by the EasyJTAG and Z3X Team, backed by more than 25 years of GSM engineering experience. Designed for repair centers, data recovery laboratories, forensic specialists, and manufacturing environments, EasyJTAG Turbo combines proven reliability with modern high-speed storage support.
Hardware Features
Main Architecture
Dual-Processor Design
ATSAM3X8E ARM Cortex-M3
Main controller
USB command processing
Power management
Voltage monitoring
Security management
Firmware update handling
Synopsys UFS/MMC High-Speed Storage Processor
USB 3.1 to UFS bridge
MIPI M-PHY HS-Gear3
USB 3.1 to eMMC bridge
DDR HS200 support
USB 3.1 to SD bridge
SDSC, SDHC, SDXC, and SDUC support
UHS-I transfer rates up to 100 MB/s
UASP, BOT, and custom protocol support
High-speed data transfers
Supported Memory Technologies
eMMC
1-bit, 4-bit, and 8-bit bus support
eMMC 4.5 and newer
HS200 mode
eMMC ISP operations
Universal EasyJTAG P20 socket interface
eMMC cloning
Boot partition access
RPMB access
Firmware FFU operations
UFS
UFS 2.1 to UFS 4.1
MIPI M-PHY HS-Gear3
UFS ISP operations
Licensed EasyJTAG P20 socket interface
ECC508 hardware authentication
Descriptor access
Geometry access
RPMB support
USB Interface
USB 3.1 SuperSpeed
5 Gbps link speed
UASP support
USB Mass Storage support
Full USB 2.0 backward compatibility
Power System
Adjustable Target Power
Supported rails:
VCC
VCCQ
VOUT
VSYS
1.1V
1.8V
3.3V
Capabilities:
Programmable target voltages
Controlled power sequencing
Safe power cycling
Voltage validation before access
Measurement & Protection
Voltage Monitoring
Hardware ADC feedback available for:
VCC1
VCC2
VOUT
VSYS
1V1
1V8
3V3
Capabilities:
Target voltage detection
Power-good verification
Undervoltage detection
Voltage telemetry
Current telemetry
Protection
USB ESD protection
eMMC/UFS signal line protection
Filtered power rails
Isolated clock translation
Security
ATECC508A Secure Element
Z3X eSIM v1.0 Support + Dual Box Linkage
Capabilities:
Hardware authentication
Cryptographic key storage
Secure licensing
Challenge-response verification
Clone protection
Secure device pairing
Professional Service Features
eMMC ISP repair
UFS ISP repair
Boot repair
Firmware flashing
Full memory imaging
Partition access
RPMB operations
Device identification
Factory mode operations
Test-point servicing
Dead-device recovery
Secure licensing
Advanced Android service functions
Professional data recovery workflows
Advanced File System Support
EasyJTAG Turbo integrates a high-performance block device layer with modern filesystem support for eMMC, UFS, SD, SSD, and image files.
Fully Supported
Filesystem Access
EXT2 / EXT3 / EXT4 Read / Write
FAT12 / FAT16 / FAT32 / VFAT Read / Write
XFS Read / Write
BTRFS Read / Write
F2FS Read / Write
EROFS Read Only
Under Development
Filesystem Access
exFAT Read / Write
NTFS3 Full Read / Write
Legacy NTFS Read + Limited Write
APFS Read Only
HPFS Read / Write
QNX4 Read + Limited Write
QNX6 Read Only
Supported filesystems are block-device based and optimized for modern storage technologies including eMMC, UFS, SD, SSD, and forensic disk images.
Designed by Repair Engineers. For Repair Engineers.
For more than a decade, EasyJTAG products have been trusted by thousands of repair shops, forensic specialists, data recovery laboratories, and service centers worldwide.
EasyJTAG Turbo is not just another programmer. It is the result of decades of practical experience, countless repaired devices, and a simple philosophy:
Make difficult jobs easier. Make impossible jobs possible.